STATUS
- AVAILABLE
Click
here for more pictures
Description :
The original black Audiolab 8000C Pre-amplifier is a highly versatile control
preamplifier. It offers the flexibility of tone controls, built in class A headphone
amplifier and low output impedance line amplifier. It has inputs for CD, phono,
tuner, video, tape 1 and tape 2. The phono inputs match all types of modern
Moving Coil and Moving Magnet cartridges.The low output impedance line amplifier
is a miniature class A power amplifier with current mirror bias. Together
with the Audiolab 8000P, they offer outstanding sound quality, with design and
performance refinements that have hitherto only been available from a small
number of far more expensive products. The Audiolab amplifiers are fully compatible
with all modern Hi-Fi components and loudspeaker systems. They will do full
justice to the finest traditional Hi-Fi System, yet they have the facilities
and flexibility to complement modern equipment such as cd players, video recorders
and digital sound recorders. With their slim styling and attractive finish the
Audiolab 8000C and 8000P are easily accomodated in the owner's living environment.
The controls are carefully positioned and spaced for maximum operating convenience.
Critical attention has been given to the choice of electronic components, materials,
circuits and layouts so that sound quality is never compromised. The Audiolab
amplifiers incorporate many technical innovations which are the results of elegant
and cost effective engineering. While listening, many people will know why Audiolab
amplifiers are Musical, Affordable and Logical...
Specifications
:
Input Sensitivity and Impedance.............Phono MM 2.0 mV/100 ohm/85 pF
..............Phono
MC 110 µV/100 ohm/13.3 nF
..............CD,
Video, Tuner, Tape 1 & 2: 100 mV/20 k ohm
Phono Overload (IHF)............................Phono MM 30dB rel 5.0mV, maximum
input 175mv
.............................Phono
MC 25dB rel 0.5mV, maximum input (1kHz) 10mv @1kHz
Signal to Noise(IHFA rel 0.5v output)......Phono MM 81dB
.......Phono
MC 77dB
.......Video
/ Tuner / Tape 1 & 2 92dB
Frequency Response............................Phono MM and Phono MC (RIAA) 20Hz
to 20kHz ± 0.5dB
Tone Control Range Bass......................± 6dB at 20Hz
Treble..................................................± 6DB @20kHz
Total Harmonic Distorion & Noise...........Less than 0.01% any frequency
20Hz to 20 kHz
Channel Balance...................................Within 1dB
Channel Separation...............................Better than 60dB @ 1kHz
Polarity (Phase)....................................Non inverting for all inputs
Pre Amp Output....................................OUTPUT 1 and OUTPUT 2. Level
707 mV.
.....................................Output
impedance 100 ohm. Maximum output >7.76 V RMS.
Headphone Output................................Maximum output 7.76 V RMS. Output
impedance 100 ohm.
.................................Suitable
for headphones 8 ohm to 2 kohm impedance.
.................................Headphones
operate when OUTPUT is switched OFF.
Record Output......................................TAPE 1, TAPE 2, VIDEO 100
mV.
Output impedance.................................1000 ohm, 1600 ohm with phono
source.
Output.................................................Switches pre-amp outputs
off.
..................................................Attenuation
is >60 dB. Muting is controlled automatically.
Operating Temperature Range................10 ~ 30° C
Dimensions(w x d x h)...........................44.5 x 33 x 7.5 cm
Weight.................................................6 kg
Miscellaneous
:
Matching.............................................Audiolab
8000P Power amplifier
Made in...............................................England
Condition.............................................9 / 10 (Good Condition)
Product Information
:
http://www.artech-electronics.com/us/products/audiolab/8000c.html